| End Connection:: | Flange Connect | Design Pressure.: | PN10 , PN16 |
| Filter Mesh Size.: | As Your Requirement | Design Specific Fluid Gravity.: | Design Specific Fluid Gravity. |
| Body: | A216 WCB | Filter/ Screen: | SS 304 / SS 316 / Stainless Steel |
| Size: | DN 50~ DN1000 | Medium: | Water, Oil, Gas Etc., |
Cast Steel A216 WCB Y Strainer With SS304 Screen , JIS 10K Flanged
Brief introduction:
The strainer may be used on all types of pipelines to collect
granulated foreign substances and
contaminants collected. It can improve the clearance in the medium,
and prolong the life of valves
and other equipments. It is suitable for wafer, petroleum and
steam.
Mail part & material
Body: gray cast iron, cast iron, ductile iron
Filter: stainless steel
O-ring: NBR
Technical Specification
- Nominal diameter: 65～500mm
- Nominal pressure: 1.0/1.6/2.5Mpa
FEATURES
• Iron strainers are complete with Flat Face (Series 125YF) or
Raised Face (Series 250YF)
flanges in accordance with ASME B16.1.
• Strainer body meets applicable ASME Standard.
• One piece cast body.www.kcmtech-valve.com
• Strainers equipped with bolted cover flange that utilize a flat
gasket seal.
• Low pressure drop.
• Upper and lower machined seats.
• 304 SS perforated screens are standard.
• Drain/Blow-off connection furnished with plug as standard.
• Generous screen area and properly proportioned straining chamber
to minimize initial pressure
drop while maximizing time between cleanings.
• Compact end to end dimension.
STRAINER INSTALLATION INSTRUCTIONS
A . Ensure all machined surfaces are free of defects and that the
inside of the
strainer is free of foreign objects.
B . For horizontal pipelines, the strainer should be installed so
that the drain
connection is pointed downwards.
C . For flanged end strainers, the flange bolting should be
tightened gradually in
a back and forth clockwise motion.
D . Once installed, increase line pressure gradually and check for
leakage around joints
E . If the strainer is supplied with a start-up screen, monitor
pressure drop carefully.
www.kcmtech-valve.com
| SIZE | INCH | 2 | 2½ | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
| MM | 50 | 65 | 80 | 100 | 130 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
| A | INCH | 7.875 | 10 | 10.125 | 12.125 | 15.625 | 18.5 | 21.625 | 25.75 | 30 | 33.25 | 38.75 | 43.12 |
| MM | 200 | 254 | 257 | 308 | 397 | 470 | 549 | 654 | 759 | 846 | 984 | 1095 |
| B | INCH | 5.25 | 6.5 | 7.5 | 9 | 13.125 | 15.75 | 18 | 18.5 | 22 | 28.625 | 30 | 31 |
| MM | 133 | 165 | 190 | 227 | 335 | 401 | 457 | 471 | 557 | 727 | 762 | 788 |
| C | INCH | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 |
| MM | 51 | 65 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 356 | 406 | 457 |
| Weight | kgs | 13 | 16 | 21 | 30 | 43 | 60 | 90 | 140 | 175 | 392 | 627 | 1032 |
| FEATURES |
| Screen has widened opening dimension. |
| Because the screen is made of stainless steel, it has great
durability and corrosion |
| resistance on steam, gas, and liquid,,,etc. |
| Its plug is made of rust-resistant material for disassemble
cleaning. |
| It is designed through an accurate liquid-resistant test. guarantee
safety. |
|
| SPECIFICATIONS |
| SIZE(UNIT:mm)-------------- 250, 300, 350, 400, 450, 500 |
| APPLICABLE---------------- STEAM, WATER, OIL, AIR, OR THE OTHER |
| OPERATING PRESSURE------CAST IRON - MAX 10KGf/㎠ |
| CAST STEEL - MAX 30KGf/㎠ |
| NET------------------------- 65-100mm Ø1.2 - 134EA/in2 |
| 125-150mm Ø1.5 - 103EA/in2 |
| 200-250mm Ø2.5 - 32EA/in2 |
| 300-400mm Ø3.0 |
| CONNECTION ENDS--------- FLANDGED TYPE(KSB 10KGf/㎠) |
| (KSB 30KGf/㎠) |
|
| MATERIALS |
| BODY --------------------- CAST IRON |
| NET----------------------- STAINLESS STEEL PLATE |
| COVER-------------------- CAST IRON |
KCM TECHNOLOGY GROUP CO.,LTD
Address: Bin Hai Economic Development Industrial Zone.
WenZhou,ZheJiang Province,China
Tel :+0086-577-86879200
Fax :+86-577-86918728
Phone :+86 13175600492
Skype :Andy YOU 229
Web:www.kcmtech-valve.com&www.andy-valve.com
Email:admin@kcmtech-valve.com&sales@andy-valve.com
Main products:Cast steel(iron) gate check globe ball
valve,strainer(API600)
Forged steel gate,globe,positionswing check valve(API602)
Forged steel ball valve,SS gate glove check ball valve(API603)
Stainless steel Camlock&grooved couplings,screwed fittings
